Audio Speaker Subwoofers

JL Audio 10W7-3 10W7 Subwoofer 10 Speaker 3-Pack Foam Edge Repair Kit (Triple)

JL Audio 10W7-3 10W7 Subwoofer 10 Speaker 3-Pack Foam Edge Repair Kit (Triple)
JL Audio 10W7-3 10W7 Subwoofer 10 Speaker 3-Pack Foam Edge Repair Kit (Triple)
JL Audio 10W7-3 10W7 Subwoofer 10 Speaker 3-Pack Foam Edge Repair Kit (Triple)
JL Audio 10W7-3 10W7 Subwoofer 10 Speaker 3-Pack Foam Edge Repair Kit (Triple)
JL Audio 10W7-3 10W7 Subwoofer 10 Speaker 3-Pack Foam Edge Repair Kit (Triple)
JL Audio 10W7-3 10W7 Subwoofer 10 Speaker 3-Pack Foam Edge Repair Kit (Triple)
JL Audio 10W7-3 10W7 Subwoofer 10 Speaker 3-Pack Foam Edge Repair Kit (Triple)

JL Audio 10W7-3 10W7 Subwoofer 10 Speaker 3-Pack Foam Edge Repair Kit (Triple)    JL Audio 10W7-3 10W7 Subwoofer 10 Speaker 3-Pack Foam Edge Repair Kit (Triple)
New-Edge-It Foam Kits by Brand. New-Edge-It Foam Kits by Size. Speaker Grills & Grill Cloth. Repair Kits For Bose 901 & 802.

Send Speakers To Us For Repair. JL Audio 10W7-3 10W7 Subwoofer 10 Speaker 3-Pack Foam Edge Repair Kit (Triple). The most common problem with speakers are rotted, torn or damaged surrounds.

The surround is the outer suspension part of the cone. Constant vibration, time and the environment cause foam and rubber surrounds to degrade. Cloth and paper surrounds can become brittle.

This causes distortion and poor performance. Luckily, our easy to install repair kits will make your old speakers sound just like new! America's # 1 brand since 1992.

See Product Description, Title or the "Fits Models" tab to see speakers listed for this repair kit. 3 x made in USA foam surrounds: Outer diameter: 10.5" (267mm), Roll outer diameter: 10.375" (264mm), Cone diameter: 7.375" (187mm), Inner diameter: 6.75" (171mm) Flat attach.

Exact dimensions can also be viewed in the photo gallery. 2 x MI-3035 rubber based repair adhesives. Easy to follow color illustrated instructions. Brand new formula made in USA surrounds last much longer than the originals. We do NOT use generic glues or low quality imported surrounds like others sell.

Our exclusive clear drying rubber based repair adhesive is designed for paper, poly, and composite cones. Dries flexible, strong and clear. Kits can be installed without removing the dust caps. Dust caps, shims and gaskets are available for most models if needed.

Access to our complete library of how-to speaker repair videos. Simply Speakers® - Quality Speaker Parts since 1992! We are not responsible for wrong or un-deliverable addresses. BE SURE YOU HAVE CORRECT ADDRESS ON FILE!

Please take special care to order carefully and completely. We have thousands of speaker repair parts in stock and not all models are listed for every part we sell. In some cases, you will need to verify the correct parts by removing the defective component from your system first and prior to ordering to determine which model you have. You may need to measure a part of your speaker to determine if the replacement part is compatible.

We can help you in determining which parts you need. For other frequently asked questions. Ask all questions before placing an order.

Units showing signs of use, ie. Special order items are NOT returnable. Due to the delicate nature of voice coils and their installation, we.

Simply Speakers was founded in 1992 in a small shop in St Petersburg, Florida. We have been on the Internet since 1995 and have grown to become one of the largest factory authorized parts centers in the USA. Today, we occupy our own stand alone building with over 11,000 square feet dedicated entirely to speaker repair parts and accessories. We treat every customer project as if it were our own.

We take the time to do it right the first time, every time! SS Audio is our trademarked in-house brand of speaker foam replacement kits, speaker diaphragms, recone kits, speaker grill cloth, and more! We strive to provide the best quality parts at the best prices!

Let us know what you need. We are here for you. Check them out here on our. Below are a couple of photos of our shop in St. I refoamed my 8 woofers from 1985 and the sound is fantastic.

The instructions were spot on and answered all my questions. Getting the old glue off was the hardest part of the job and the most consuming. Thanks for a great product.

I have just finished replacing the foam surround on one of my two 11 woofers. The video instructions have been unusually helpful, especially the hints to apply adhesive to the back side of the foam before turning it over and attaching it to the cone. It was also very helpful to see how slowly the adhesive sets up, and to keep turning the speaker and pressing the foam into place until the adhesive holds. Illustrating these techniques, beyond your providing the foams and the adhesive, made a huge difference.

Although I think I could have centered the foam better on the cone as you advised, everything worked out. I will get to the second speaker eventually (it still works but only about half of the foam is left intact)THANK YOU so much for giving me back my sound system and for saving the planet just a little bit by allowing me to repair and not replace.

Just wanted you to know after purchasing and installing foam for the sub and center of my Paradigm system, speakers sound great again! Thanks for the detailed instructions in getting it done; confident now, that when the Atoms fail in the same fashion, I will be able to put them back right again.

Having done this a number of times the old way shims, dustcaps, etc... , this kit seemed too easy. It was, and the result is excellent. The amount of time and work saved over doing it the old way, makes it a bargain. I can't imagine ever replacing surrounds the old way again.

In this day and age when VERY few things even meet expectations, to have them so profoundly EXCEEDED is a real treat. Keep up the great work! I just wanted to say THANK YOU, THANK YOU, THANK YOU for an easy speaker repair experience!

I utilized the YouTube video to take me step-by-step through the process. The instructions and Youtube video made things very easy to follow.

I now have a fully functional 2002 Toyota Avalon subwoofer!! No more sound only in the front, now I can enjoy the whole JBL experience! You all made the process as painless as possible and I actually enjoyed doing it myself! This is just a note of thanks.

I ordered a new set of passive radiators for my ESS Heil AMT1-A speakers on Nov 6. You beat Amazon which usually takes longer. I talked to your tech guy first and he was a big help in helping to decide what to get. I installed the new radiators today and they are just fine? Thanks again for your great service and keep up the great work!

A few days before discovering Simply Speakers I needed replacement surrounds for my Cerwin-Vega AT-12's. I ordered them from Orange County Speakers in CA. They assured their glue was the best and easy to work with.

It turned out to be ordinary contact cement that had no work time.... Much too aggressive and almost cost me my speakers. By that time I had found Simply Speakers, read about your glue, and ordered a tube.

I must say I wish I had ordered the kit from you guys to begin with. With your glue I was able to finish installing the surrounds just as your video describes.

My Cerwin-Vega's are up and running again. I will order any future speaker kits and supplies from Simply Speakers! Just wanted to thank the entire staff for a great job on my Snell EII 8 woofer. These speakers are 43 years old and now good as new again. All I can say is that Simply Speakers is the most professional and courteous company with which I have ever done business.

Re-installing the woofer was a 5 minute process and the sound was great. Thanks again for a most pleasant experience. I would recommend your company to any audiophile.

My father in law gave me his Marantz 15 3 way speaker boxes. I went to repaint the boxes and the foam just fell off. I found you guys and ordered a set. It is absolutely amazing you guys have replacements for speakers built in the 80's like these.

After getting them I put the replacements in as instructed, being an engineer I was a bit skeptical this would work. They fit perfectly, and would you believe the glue provided lasted until I finished the second speaker?

They are solid, and you guys are an example of how something should be done. Q: I think I was supposed the get TWO foam edges with my foam replacement kit but I think I only received ONE edge. Try to peel the two edges apart.

What do I do next? DO NOT glue anything if you are unsure of the fit or sizing. If you GLUE it, you OWN it. Q: I have a JL Audio subwoofer, and I do not know my model. How do I order a repair kit for it? If you are purchasing more than one item from us remember to wait and pay for all items together. You can also request a combined invoice. Q: How can I add an item to an order I've already paid for? A: Our order management system is highly automated making it difficult for us to change an order after it has been placed. You will need to place a new order in this case. A: We do not mark merchandise values below actual value or mark items as "gifts". USA and International government regulations prohibit such behavior. Q: I would like to order some speaker fabric but I need a size longer than 1 yard (36 x 60 inches). A: Yes, we can cut your speaker fabric in 1 yard increments as long as you need it, up to 15 yards (45 feet).

The width of the material is always 60 inches (5 feet). Q: What happens if the parts I ordered do not fit? A: If you ordered an item, and it does not fit, please message us. To speed things up please have your order number ready. PLEASE DO NOT GLUE OR INSTALL ANYTHING!

Q: I just finished replacing my diaphragm and the horn still does not work. A: You might have a blown fuse, bulb, or defective crossover or component. This would cause the system not to send a signal to the horn. Test the horn by hooking it up directly outside the speaker cabinet at LOW POWER. If it works you will need to test the fuse, bulb or crossover components and repair or replace them as needed.

If your recone kit shims do not fit you can cut them into strips and insert several of the strips evenly around the magnet. You can also substitute our shim stock with thinner material such as business cards or other sturdy pieces of clean paper stock cut into strips. 10 Altec Lansing 510 Foam Edge Woofer Surround Speaker Repair Kit 4 Pack. JL Audio 10W7-3 10W7 Subwoofer 10 Speaker Foam Edge Repair Kit (Pair). RS10 Infinity Servo Subwoofer Foam Edge Repair Kit for 10 Woofer (Single).

This listing is currently undergoing maintenance, we apologise for any inconvenience caused. This item is in the category "Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Parts\Speaker Parts & Components\Other Speaker Parts &" and is located in this country: US.

This item can be shipped worldwide.
  1. Type: Foam Kit
  2. Country of Manufacture: United States
  3. Compatible Brand: For JL Audio
  4. Compatible Model: 10W7-3
  5. Brand: JL Audio
  6. MPN: 10W7-3
  7. Country/Region of Manufacture: United States

JL Audio 10W7-3 10W7 Subwoofer 10 Speaker 3-Pack Foam Edge Repair Kit (Triple)    JL Audio 10W7-3 10W7 Subwoofer 10 Speaker 3-Pack Foam Edge Repair Kit (Triple)